Мониторинг из консоли
Мониторинг сетевых соединений
|
0 1 2 3 |
nload |
|
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 |
Command line syntax: nload [options] [devices] nload --help|-h Options: -i max_scaling specifies the 100% mark in kBit/s of the graph indicating the incoming bandwidth usage ignored if max_scaling is 0 or the switch -m is given default is 10240 -m show multiple devices at a time; do not show the traffic graphs -o max_scaling same as -i but for the graph indicating the outgoing bandwidth usage default is 10240 -s smoothness sets the "smoothness" of the average in/out values 1 means little smoothness (average over a short period of time) 9 means high smoothness (average over a long period of time) default is 9 -t intervall determines the refresh interval of the display in milliseconds if 0 print net load only once and exit default is 500 -u h|b|k|m|g sets the type of unit used for the display of traffic numbers H|B|K|M|G h: human readable (auto), b: Bit/s, k: kBit/s, m: MBit/s etc. H: human readable (auto), B: Byte/s, K: kByte/s, M: MByte/s etc. default is k -U h|b|k|m|g same as -u, but for a total amount of data (without "/s") H|B|K|M|G default is M devices network devices to use default is "eth0" example: nload -t 200 -s 7 -i 1024 -o 128 -U h eth0 eth1 |
При редактировании настроек в процессе работы (при нажатии «o») изменение значений клавишами PageUp и PageDown
Мониторинг загрузки системы
|
0 1 2 3 |
htop |
